We are one of the top-notch organization of our domain that are involved in rendering Water Reservoir Waterproofing services. These services deal with waterproofing of the surfaces of water reservoirs and enable to make their surfaces highly leakage & crack resistant. It also helps to enhance surface finish. To ensure durable standards of different surfaces, our professionals use qualitative coating materials for their waterproofing. Our Water Reservoir Waterproofing services are demanded by customers for their cost-effectiveness, reliability and timely execution.
Requirement : 0.40 kg/each Point Leak and 1.20kg/metre of Construction joint for tunnels, basements, water reservoirs and other water retaining structures
PERMAKAR 4 :
Requirement : 0.095 kg/each Point leak and 0.32 kg/metre of Construction joint for tunnels, basements, water reservoirs and other water retaining structures
Cleaning the surface; preparing the surface by acid etching; treating the surface with a two layer plaster; the first layer shall be 7 mm thick in case of inside walls and floors of water reservoirs and swimming pools, 6 mm thick for sunken slabs/toilet floors and inside of tunnels, basements, etc. with octadecanoic acid based cementitious waterproofing compound (bulk density not greater than 0.5 gm/cc, moisture content not greater than 2.0% and a free fatty acid not greater than 0.2%), e.g., PERMAKAR 3, and cement in the weight ratio of 3:50 for waterproofing compound and cement; cement-sand (1:2 on floors of basements and tunnels; 1:3 elsewhere) plaster (12 mm thick on floor; 8 mm thick on vertical surfaces and at ceiling) and curing the plastered surface; the treatment shall be impermeable under a waterhead of 20.0 metres
Requirement : 0.72 kg/sqm for inside of tunnels, basements and toilets and 0.84 kg/sqm for water reservoirs and other water retaining structures where treatment will be in direct contact with water