Ours is an esteemed organization, involved in providing world-class Swimming Pool Waterproofing services. We use qualitative coating materials for waterproofing of surfaces of corners, bottom and other parts of swimming pools. It makes the particular surfaces highly resistant to leakage, cracks and other damaging factors. Owing to cost-effectiveness, timely execution and reliability of our Swimming Pool Waterproofing services, we are able to create a huge clientele across the nation.
Requirement : 0.40 kg/each Point Leak and 1.20kg/metre of Construction joint
PERMAKAR 4 :
Requirement : 0.095 kg/each Point leak and 0.32 kg/metre of Construction joint
Cleaning the surface; preparing the surface by acid etching; treating the surface with a two layer plaster; the first layer shall be 7 mm thick in case of inside walls and floors of water reservoirs and swimming pools, 6 mm thick for sunken slabs/toilet floors and inside of tunnels, basements, etc. with octadecanoic acid based cementitious waterproofing compound (bulk density not greater than 0.5 gm/cc, moisture content not greater than 2.0% and a free fatty acid not greater than 0.2%), e.g., PERMAKAR 3, and cement in the weight ratio of 3:50 for waterproofing compound and cement; cement-sand (1:2 on floors of basements and tunnels; 1:3 elsewhere) plaster (12 mm thick on floor; 8 mm thick on vertical surfaces and at ceiling) and curing the plastered surface; the treatment shall be impermeable under a waterhead of 20.0 metres.
Requirement : 0.72 kg/sqm for inside of tunnels, basements and toilets and 0.84 kg/sqm for water reservoirs and other water retaining structures where treatment will be in direct contact with water
OTHER MATERIALS/SQM :
For mixing with PERMAKAR 3
cement : 12 kg for inside of tunnels, basements and toilets
14 kg for water reservoirs and other water retaining structures